X Series E53 X5 3.0i (M54) OFFRD
Pull special tool 11 2 300 / 11 5 180 back until flywheel is no
longer secured.
Remove special tool 11 3 244 and special tool 11 3 240 .
Crank engine twice in direction of rotation until cam tips on inlet
and exhaust camshafts on 1st cylinder face one another.
Secure crankshaft in firing TDC position with special tool
11 2 300 .
X3 only:
Secure crankshaft with special tool 11 5 180 in TDC position of
1st cylinder.
Important!
Do not turn the engine back.
Remove special tools 11 2 300 / 11 5 180 before starting
engine.
RA Adjusting camshaft timing (M52TU / M54 / M56)
BMW AG - TIS
06.02.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
