X Series E53 X5 3.0i (M54) OFFRD
Important!
Oil escapes after screw plugs have been removed. Have
cleaning cloths and container ready.
Make sure no oil runs onto belt drive. Remove any remnants
of oil immediately with cleaning cloth.
Remove screw plugs, catch escaping oil on inlet and exhaust
sides.
Remove sealing caps with special tool 11 6 170 or with
commercially available short flat nose pliers.
E85:
Use commercially available offset flat nose pliers.
Important!
Left-hand threads.
Release fitting screws on inlet and exhaust sides.
Detach plug connections from camshaft sensor and solenoid
valves on exhaust and inlet sides.
RA Removing and installing or replacing double VANOS adjustment unit (M52TU / M54 /
BMW AG - TIS
06.02.2013 16:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
