X Series E53 X5 3.0i (M54) OFFRD
Press lock and detach vent hose from cylinder head cover.
Pull off retainer (1).
Disconnect plug connection (2) for intake air temperature sensor.
Detach terminal strip (3) from fuel injectors and lay to one side.
Disconnect plug connection (1) on tank venting valve.
Remove tank venting valve from retainer (2) on manifold.
Note:
For a better overview, this work step is shown on an engine that
has been removed.
Important!
Catch and dispose of fuel as it escapes.
Instructions for removing and installing fuel hoses.
Unclip fuel line (1) from holder (2).
Unlock fuel line (1).
RA Removing and installing intake air manifold (M54)
BMW AG - TIS
06.02.2013 16:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -