X Series E53 X5 3.0i (M54) OFFRD
12 41 020
Removing and installing/replacing starter
motor (M54)
Necessary preliminary tasks:
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery negative lead from battery
•
E83 only: Remove pressure accumulator
Note:
Remove starter motor from below.
Unscrew nut (1).
Tightening torque 12 41 4AZ
.
Disconnect battery positive lead (2) from starter motor.
Note:
For purposes of clarity, reinforcement plate is now shown.
Do not remove reinforcement plate.
Release screws (1).
Tightening torque 12 41 1AZ
.
Pull starter motor out of transmission mount and turn in order to
facilitate access to control leads on starter motor.
Unscrew nuts (1).
Tightening torque 12 41 4AZ
.
Detach control leads (2) from starter motor.
Remove starter motor.
RA Removing and installing/replacing starter motor (M54)
BMW AG - TIS
06.02.2013 17:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
