X Series E53 X5 3.0i (M54) OFFRD
12 42 530
Removing and installing/replacing battery
positive lead (between starter motor and
alternator) (M54)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Disconnect battery negative lead
Follow instructions for disconnecting and connecting battery
•
Remove intake filter housing
Version 1:
Release nut and remove battery positive lead (2) from alternator.
Tightening torque 12 31 1AZ
.
Version 2:
Release nut (2) and remove battery positive lead from alternator.
Tightening torque 12 31 1AZ
.
RA Removing and installing/replacing battery positive lead (between starter motor a
BMW AG - TIS
06.02.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -