X Series E53 X5 3.0i (M54) OFFRD
Release screws.
Tightening torque, 12 90 4AZ.
Remove cover (1) on control unit box.
Installation:
Insert fixtures (1) of cover for control unit box in openings (2).
Order:
1.
Main relay of Digital Motor Electronics
2.
Engine fuses of Digital Motor Electronics
Notes on troubleshooting:
If the starter motor cranks the engine during the starting sequence
but the engine fails to fire, then:
1.
Check engine fuses
2.
If fuses are blown, replace them completely with fuse holder
3.
Find out why fuses have blown
Continue troubleshooting as per DIS instructions.
RA Replacing main relay (M62, M54)
BMW AG - TIS
06.02.2013 17:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
