X Series E53 X5 3.0i (M54) OFFRD
Removing fuel tank underbody protection on left.
Unlock connection (3) on carbon canister and detach.
Using special tool 16 1 157 , seal opening for connection (3) on
carbon canister.
Remove tank cap and connect special tool 16 1 174 to tank filler
neck.
Using adjusting wheel (1), clamp special tool 16 1 174 firmly to
tank filler neck.
Caution!
Set pressure regulator on special tool 16 1 171 fully in "-"
direction.
Connect special tool 16 1 171 using compressed air line (1) to
garage compressed air system (8...10 bar).
Connect pressure sensor (2) of Diagnosis and Information System
with measuring range of 0...3.5 bar.
Caution!
Do not connect fast-release coupling (3) of special tool
16 1 171 yet.
RA Checking fuel tank and tank ventilation system for leaks
BMW AG - TIS
06.02.2013 17:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -