X Series E53 X5 3.0i (M54) OFFRD
16 12 000
Removing and installing/replacing sensor for
fuel level gauge (right)
Important!
Ensure adequate ventilation in the place of work!
Ensure absolute cleanliness when working on the open fuel
tank.
Contaminants in the fuel tank can impair driving operation or
may even result in vehicle breakdown!
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove rear seat bench
Detach rubber plug above sensor unit on right.
Fold back rubber mat.
Important!
Do not damage gasket.
Release screws (1) and fold back metal cover.
RA Removing and installing/replacing sensor for fuel level gauge (right)
BMW AG - TIS
06.02.2013 17:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
