X Series E53 X5 3.0i (M54) OFFRD
17 11 100
Removing and installing/replacing coolant
expansion tank (M54 / M57)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Note:
Follow instructions for working on cooling system.
Remove front underbody protection.
Recycling
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Installation:
Slowly top up coolant expansion tank with coolant until marking (2)
on float needle has reached height of top edge on expansion tank
(maximum fill level).
Use only recommended coolant.
Note:
Tank marking indicates coolant level at approx. 20
°
C.
Vent cooling system and check for leaks.
RA Removing and installing/replacing coolant expansion tank (M54 / M57)
BMW AG - TIS
06.02.2013 17:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
