X Series E53 X5 3.0i (M54) OFFRD
21 52 500
Removing and installing / replacing clutch
master cylinder
Installation:
After completing work, bleed clutch hydraulic system.
Remove the cover (1).
Draw off brake fluid up to supply hose of clutch hydraulic system.
For this purpose, use only a vacuum pipe that is exclusively used
for removing brake fluid.
Remove the supply hose (1) from the expansion tank.
Remove lower left trim panel from instrument panel.
Release screws (1).
RA Removing and installing / replacing clutch master cylinder
BMW AG - TIS
06.02.2013 18:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -