X Series E53 X5 3.0i (M54) OFFRD
Caution!
The section "Removing and installing reinforcement plate"
contains important installation instructions.
Remove reinforcement plate.
Remove engine underguard at front.
Detach stabilizer bar and slide forwards. This operation is
described in the section "Removing and installing stabilizer bar".
Remove and install front propeller shaft.
Release screws and remove exhaust bracket (1).
RA Removing and installing transmission (S5D 280Z, M54)
BMW AG - TIS
06.02.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
