X Series E53 X5 3.0i (M54) OFFRD
Release screws.
Tightening torque, 23 00 1AZ.
Preparing transmission mount, special tool 23 0 130 :
To do so, bolt special tool 23 0 133 (3) to special tool 23 0 131
(1) and 23 0 132 (2).
Note:
Observe side markings.
Support transmission and transfer case with special tool
00 2 030 and 23 0 130 .
Unclip cable from transmission.
Release screws and remove cross-member (1).
Tightening torque, 27 00 10AZ.
RA Removing and installing transmission (S5D 280Z, M54)
BMW AG - TIS
06.02.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
