X Series E53 X5 3.0i (M54) OFFRD
24 30 009
Removing and installing/replacing selector
unit (A5S 360R/390R, A4S 200R)
Important!
After completion of work, check transmission oil level.
Use only the approved transmission fluid in this automatic
transmission.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove and install transmission fluid sump.
•
Remove and install/replace transmission fluid screen.
Disconnect all plug connections on shift unit.
Unclip temperature sensor (1) from holder.
Note:
As of model year 2001 (04/2000), the temperature sensor is
integrated in the wiring harness.
Important!
Do not release screws (1).
Release all other screws, with outside torx E8, on shift unit and
remove shift unit.
RA Removing and installing/replacing selector unit (A5S 360R/390R, A4S 200R)
BMW AG - TIS
06.02.2013 18:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
