X Series E53 X5 3.0i (M54) OFFRD
25 11 111
Replacing selector rod joint
Transmission removed.
Detach locking clamp.
Withdraw shift rod (1) from shift rod joint (2) and remove disks (3).
Installation:
Grease shift rod pin (4).
Grease,
refer to BMW Service Operating Fluids.
Large contact surface of disks (3) must rest on shift rod joint (2).
Lever spring washer (1) out of groove and push a little towards
rear.
Press straight pin (2) upwards or downwards out of shift rod joint
and remove shift rod joint.
Installation:
Grease ball of transmission selector shaft.
Grease,
refer to BMW Service Operating Fluids.
Replace spring washer (1).
RA Replacing selector rod joint
BMW AG - TIS
06.02.2013 18:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -