X Series E53 X5 3.0i (M54) OFFRD
Unfasten screws.
Installation:
Replace self-locking nuts.
Tightening torque 32 00 1AZ
.
Warning!
Danger of injury!
Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.
When supporting components, make sure that
•
the vehicle can no longer be raised or lowered
•
the vehicle does not lift off the locating plates on the
lifting platform
Insert special tools 33 4 226 and 33 4 221 into corresponding
mountings of special tool 00 2 040 .
Align special tool 00 2 040 to front axle carrier.
If necessary, lower special tool 33 3 274 .
Support front axle carrier by raising special tool 00 2 040 .
Support front axle carrier with workshop jack.
Unfasten screws.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 31 10 1AZ
.
RA Replacing front axle carrier
BMW AG - TIS
06.02.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -