X Series E53 X5 3.0i (M54) OFFRD
Important!
Keep press-fit areas clean and free of oil and grease.
Coat bearing seat in swivel bearing over 50 % of its length
with Loctite 638.
Wider chamfer of bearing must point to swivel bearing!
Clean press-fit area of new bearing.
Clean bearing seat in swivel bearing and coat over 50 % of its
length with Loctite 638.
Important!
Wider chamfer (1) of bearing must point to swivel bearing!
Align bearing by way of wider chamfer to swivel bearing and draw
in with special tools 31 2 113 , 22 1 018 , 33 4 262 and
33 3 261 .
Note:
The bearing can be forced out of the swivel bearing on a press.
Install new circlip (1).
Note:
Make sure circlip (1) is correctly seated.
RA Replacing bearing (49 mm) for front wheel
BMW AG - TIS
06.02.2013 19:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
