X Series E53 X5 3.0i (M54) OFFRD
33 55 000
Removing and installing/replacing rear
stabilizer bar
Remove wheel.
Unfasten left and right stabilizer link from stabilizer bar.
Identify stabilizer bar on left side of car with a colored mark.
Installation:
Check rubber mount; replace if necessary.
Tightening torque 33 55 2AZ.
Unfasten stabilizer bar from rear axle carrier and remove.
Installation:
Check rubber mount; replace if necessary.
Install stabilizer bar in correct position. Color marking or stamped
BMW Part No. on stabilizer bar must be on left side of car.
Tightening torque 33 55 3AZ.
RA Removing and installing/replacing rear stabilizer bar
BMW AG - TIS
06.02.2013 21:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
