X Series E53 X5 3.0i (M54) OFFRD
34 33 505
Removing and installing/replacing brake
booster
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove wiper console
•
Remove and install DSC brake master cylinder
•
Remove pedal trim
•
Remove brake booster from brake pedal and from engine
compartment partition wall.
After completing tasks, bleed brake system.
Remove emergency siren with holder.
Carefully withdraw brake unit from firewall, swivel in direction of
engine and then remove towards top.
RA Removing and installing/replacing brake booster
BMW AG - TIS
06.02.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
