X Series E53 X5 3.0i (M54) OFFRD
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact surface with universal cleaner,
refer to BMW Parts Service.
If there are grease residues in the area of the wheel bolt bores,
the brake disk must be removed and cleaned.
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact surface with universal cleaner,
refer to BMW Parts Service.
Check brake disk retaining bolt (1) for secure seating.
Important!
Brake disk retaining bolt must under no circumstances
protrude over contact face (2) between brake disk and disk
wheel.
Tightening torque brake disk retaining bolt:
-
Front axle 34 11 1AZ
-
Rear axle 34 21 1AZ
Apply a thin coat of grease to wheel centering (1) in disk wheel.
Note:
Refer to BMW Service Operating Fluids, Main Group 36.
RA Removing or installing front or rear wheel
BMW AG - TIS
06.02.2013 21:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
