X Series E53 X5 3.0i (M54) OFFRD
Important!
E53:
Use only wheel bolts with a separate taper (1).
Clean wheel bolts and check threads for damage, replace, if
necessary.
Replace rusty wheel bolts.
Important!
Do not apply oil to new wheel bolts.
In the case of used wheel bolts, apply an extremely thin coating of
engine oil to the threads and tapers before reinstalling them.
Important!
Under no circumstances use pneumatic or power
screwdrivers to install and tighten the wheel bolts.
Important!
The disc wheel must rest uniformly against the brake disc.
Screw in wheel bolts and tighten by hand in diagonal
sequence to center disk wheel.
Using torque wrench, tighten down wheel bolts in diagonal
and even sequence.
Tightening torque 36 10 1AZ
.
RA Removing or installing front or rear wheel
BMW AG - TIS
06.02.2013 21:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -