X Series E53 X5 3.0i (M54) OFFRD
Remove support for side members (1) and (2).
Important!
Do not kink, twist or crush lines.
Carefully slacken banjo bolt until the sound of escaping air can be
heard.
Note:
Wait approx. 2 minutes until the pressure in the air spring has
been completely reduced (hissing sound ceases).
Release banjo bolt and remove pipe.
Tightening torque 37 12 3AZ
.
Installation:
Check banjo bolt for dirt, clean if necessary.
Press quick coupling (1) downwards, press retaining ring (2)
together and detach pipe.
Remove clips (3).
RA Removing and installing/replacing rear left or right air spring
BMW AG - TIS
06.02.2013 21:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
