X Series E53 X5 3.0i (M54) OFFRD
Make reinforcement plates (1) approx. 30 mm in length for inner and outer plates, clean and coat with weld primer.
Drill new part and body in area of reinforcement plates (1) for plug welding.
Slide reinforcement plates (1) into body up to halfway and plug-weld.
Apply window adhesive to cavity bulkhead on new part (3) to body.
Fit new part with straightening attachment (4).
Weld joints (2) and plug-weld bores on new part.
RA Replacing left or right side member cover (partial replacement of A-pillar and r
BMW AG - TIS
06.02.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
