X Series E53 X5 3.0i (M54) OFFRD
41 00 ...
Position of shaped parts for cavity bulkhead
In order to reduce the interior noise and to prevent condensation water, the cavities are partitioned in specific areas of
the body. To do this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to
heating of the body to approx. 180
°
C by expansion to the shape of the cavities.
As it is not possible to heat the body to this extent for a body repair, a different procedure has been laid down for this
instance.
RA Position of shaped parts for cavity bulkhead
BMW AG - TIS
06.02.2013 22:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
