X Series E53 X5 3.0i (M54) OFFRD
51 11 156
Removing and installing front bumper trim
(up to 10/03)
Version with headlight cleaning system:
Note:
Have a rubber plug on hand and, after detaching hose (3), seal
pump outlet (4).
Detach cable tie (1) from hose (2).
Unlock hose (3), detach and seal pump outlet (4).
Release screws (1) on left/right and lift out wheel arch
finishers (2) at side.
Lever out finishers (1 and 2) on left/right and remove.
Version with Park Distance Control:
Disconnect plug connection on ultrasonic sensors (3) and
remove finisher (2).
Raise hood lid.
Release screws (1) on left/right.
Installation:
Vertical adjustment, refer to Gap dimensions, body.
RA Removing and installing front bumper trim (up to 10/03)
BMW AG - TIS
06.02.2013 23:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
