bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

24 RA Replacing A Clipped Finisher (decorative Strip On Panel For Instrument Panel, Fr|Page 1972 > < 24 RA Replacing A Clipped Finisher (decorative Strip On Panel For Instrument Panel, Fr|Page 1970
Page 4
background image

Installation:

First slide decorative strip (1) with guides (2) into recessed handle
(3) and then clip in.

Installation:

If necessary, replace faulty grommets (1) on door trim panel (2).

Decorative strip on rear door:

Insert special tool 00 9 321  at side and with second special
tool  00 9 321  next to retaining pin (2) unclip decorative
strip (1).

At front in area (3) of inside door handle, pull decorative strip (1)
out of guides.

Installation:

Pins (1) and mounts (3) of decorative strip (2) must not be
damaged.

RA  Replacing a clipped finisher (decorative strip on panel for instrument panel, fr

BMW AG - TIS

06.02.2013  23:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

24 RA Replacing A Clipped Finisher (decorative Strip On Panel For Instrument Panel, Fr|Page 1972 > < 24 RA Replacing A Clipped Finisher (decorative Strip On Panel For Instrument Panel, Fr|Page 1970