X Series E53 X5 3.0i (M54) OFFRD
Caution!
Bowden cable (1) must not be removed or replaced.
In event of a mix-up, the door will not be able to be opened.
Lock actuator (2) has a red marking on Bowden cable (1).
Installation:
Bowden cable (1) must be fitted correctly with lock actuator (2).
Seal (3) must be fitted - wind noises.
Buffers (4) must be fitted.
If necessary, replace screw (1) on lock actuator (2).
Guide (3) must be flush with support (4).
RA Removing and installing/replacing outside handle and lock actuator from left or
BMW AG - TIS
06.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
