X Series E53 X5 3.0i (M54) OFFRD
51 31 021
Removing and installing/replacing rubber
frame for windshield (top)
Caution!
Rubber frame is reinforced with an aluminum strip.
Do not damage windshield when removing rubber frame.
Carefully turn and remove rubber frame (1).
2
Tear-off lip
3
Aluminum strip
Note:
When rubber frame (1) is removed, lip (2) tears off and remains
in car.
Removing and installing windshield:
Tear-off lip (2) on new rubber frame (1) must not be damaged. If
the tear-off lip (2) is damaged, the rib (3) will stick and the
rubber frame (1) will not be able to be removed without major
damage.
Removing and installing rubber frame (1):
Cut through tear-off lip (2) on new rubber frame (1). If adhesive
has reached rib (3) through tear-off lip (2), this area must be cut
out partially.
To facilitate installation, coat rubber frame and body cutout with
turpentine substitute.
4
Aluminum strip
RA Removing and installing/replacing rubber frame for windshield (top)
BMW AG - TIS
06.02.2013 23:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
