X Series E53 X5 3.0i (M54) OFFRD
Important!
Risk of damage!
In order not to damage door trim panel (1), cut out
fabric (A), fleece (B) and foam material (C) around
penetration for drill bit (2).
Fleece (B) may wrap itself around drill bit and be torn out.
Fabric (A) may tear.
Cut out fabric (A) and fleece (B) of door trim panel (1) at
marked cutout (3).
Cutout (3) dia. 20 to 30 mm.
Important!
Risk of damage!
Do not saw into foam material (B), fleece (C) and
fabric (D). Only cut through plastic layer (A) with rotating
circular band saw.
Saw out cutout with rotating circular band saw and cut out
fabric (1) with scalpel (2).
RA Replacing left or right rear door trim panel
BMW AG - TIS
07.02.2013 00:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -