bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 2126 > < 1 RA Removing And Installing_replacing Headliner (without Slide_tilt Sunroof)
Page 1
background image

51 44 011

Removing and installing/replacing headliner
(with slide/tilt sunroof)

Remove both sun visors and counter support.

Remove all grab handles.

Remove both panels for front roof pillar (A-pillar finishers).

Remove both panels for door pillar (top) (B-pillar finishers).

Remove both panels for rear roof pillar (C-pillar finishers).

Remove both panels for rear roof pillar (D-pillar finishers).

Remove bracket on headliner at front.

Remove front and rear head restraints.

Remove sunroof lid.

Remove front and rear ceiling light.

Remove ultrasonic module.

Release screws (1).

If necessary, remove all dividing net mounts:

Detach trims of covers for dividing net mount over lock (1)
completely.

Release screw (2) and remove dividing net mounts.

Installation:

Observe position specifications on reverse side of covers (RR,
FR, RL, FL).

RA  Removing and installing/replacing headliner (with slide/tilt sunroof)

BMW AG - TIS

07.02.2013  00:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 2126 > < 1 RA Removing And Installing_replacing Headliner (without Slide_tilt Sunroof)