X Series E53 X5 3.0i (M54) OFFRD
Note:
For purposes of clarity, shown here without valve housing.
Installation:
Observe cable guide (1) for backrest heating.
Lay air hoses (2) without kinks through hole (3).
Slacken screw (1) from inside.
Detach valve housing (3) from metal nut (2).
Installation:
Housing parts (1) ... (4) must not be unclipped (leakage).
If housing is unclipped, clip valve housing together.
Carry out function check.
RA Removing and installing/replacing valve housing for front lumbar support (normal
BMW AG - TIS
07.02.2013 01:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
