bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Additional Work (normal_ Electric) With Defective Drive For Longitudinal Adjustm > < 1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)
Page 2
background image

If necessary, unclip protective caps upwards.

Unfasten screws (3).

Move seat runners forward so that they are flush.

Unlock lock (1) and disconnect plug connection (2).

Caution!

Cover door sill with protective covers (risk of damage).

Lift out front seat.

Installation:

Floor carpet must not enter area between seat rails and floor
panel beside screw points (grating noises).

Tightening torque, 52 10 1AZ.

RA  Removing and installing left or right front seat (normal / electric)

BMW AG - TIS

07.02.2013  01:06

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Additional Work (normal_ Electric) With Defective Drive For Longitudinal Adjustm > < 1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)