X5 30i Slide-tilt Sunroof Repair Instructions
54 0 ...
Notes on steel and glass slide/tilt sunroofs
(initialization/normalization/learning of
characteristic curve)
Note:
Initialization comprises:
•
Normalization
•
Learning characteristic curve
The mechanical end positions are recorded and stored during
normalization.
The characteristic curve is learnt immediately after normalization.
When the characteristic curve is learnt, the mechanical closing
forces of the slide/tilt sunroof are recorded and stored for correct
operation of the anti-trapping mechanism.
Note:
An
initialization must be performed:
•
In the event of malfunctions, e.g. no one-touch function, no
opening or no comfort function possible.
•
After disengagement of the drive unit.
•
If necessary, after an interruption of the power supply.
•
After work is carried out on the mechanism of the slide/tilt
sunroof.
Note:
The initialization sequence is dependent on the software version
of the slide/tilt sunroof module (in the sunroof drive unit).
If necessary, code slide/tilt sunroof drive unit.
RA Notes on steel and glass slide/tilt sunroofs (initialization/normalization/learn
BMW AG - TIS
07.02.2013 01:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
