bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing_replacing Drip Moulding > < 10 RA Removing And Installing_replacing Wind Deflector|Page 2393
Page 1
background image

54 13 095

Replacing/cleaning net for wind deflector

Necessary preliminary tasks:

Open slide/tilt sunroof

Cleaning:

The wind deflector net can be cleaned while installed as follows:

Accelerate vehicle with glass slide/tilt sunroof open to over

5 km/h

Stop vehicle and turn ignition key to position 2.

Note:

This prevents the wind deflector from retracting, and thereby
leaving it fully open.

Net is now accessible and easy to clean.

Replacement:

Pull plastic strip (1) out of retainers (2) on panorama glass
sunroof and wind deflector.

Installation:

If necessary, reinstall retainers.

Clip new net into place.

RA  Replacing/cleaning net for wind deflector

BMW AG - TIS

07.02.2013  01:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing_replacing Drip Moulding > < 10 RA Removing And Installing_replacing Wind Deflector|Page 2393