bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Battery|Page 2503 > < 1 RA Disconnecting And Connecting Battery Negative Lead
Page 1
background image

61 21 010

Removing and installing battery

Warning!

Observe safety instructions for handling vehicle battery.

Necessary preliminary tasks:

Open luggage compartment floor panel flap in load area

Remove spare wheel/emergency wheel

Secure removal aid to luggage compartment floor trim panel

If necessary, remove baseplate for emergency wheel

Version with air suspension:

Important!

Risk of damage!

Do not kink, twist or crush pipes.

Release screws (1).

Lay air supply unit (2) with wiring harness and pipes to one side.

Release nut (1), tightening torque  61 21 1AZ

.

Detach battery negative terminal (2) towards top, lay to one side
and secure.

Unlock positive terminal cover (3) and open.

Release nut (4) of safety battery terminal, tightening torque 
61 21 1AZ

.

Important!

Do not under any circumstances pull/lever safety battery
terminal off by force.

Detach safety battery terminal towards top, lay to one side and
secure.

RA  Removing and installing battery

BMW AG - TIS

07.02.2013  02:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Battery|Page 2503 > < 1 RA Disconnecting And Connecting Battery Negative Lead