bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Replacing Switch On Impact Cushion For Left Or Right Airbag > < 16 RA Removing And Installing_replacing Switch For Front Lumbar Support
Page 1
background image

61 31 219

Removing and installing/replacing switch for
rear seat backrest adjustment

Remove rear ceiling light.

Lever out trim (1) at rear in direction of arrow.

Installation:

Make sure trim (1) is correctly installed and engaged.

Unlock and disconnect plug connections underneath and remove
trim (1).

Press out switch for rear seat backrest adjustment (2) in direction
of arrow and remove.

Installation:

Make sure switch for rear seat backrest adjustment (2) is
correctly installed and engaged.

RA  Removing and installing/replacing switch for rear seat backrest adjustment

BMW AG - TIS

07.02.2013  02:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Replacing Switch On Impact Cushion For Left Or Right Airbag > < 16 RA Removing And Installing_replacing Switch For Front Lumbar Support