X Series E53 X5 3.0i (M54) OFFRD
E38 from 09/98, E39, E52 and E53:
Installation:
On E38 model series RHD cars with ACC from 04/2000 and on all
cars with DSC:
A gap of 0.7 mm must be adjusted between brake pedal and
brake light switch.
If this gap fails to guarantee problem-free operation, the gap must
be reduced to 0.6 mm.
Disconnect plug connection (1).
Pull brake light switch (2) in direction of arrow out of brake light
switch holder (3).
Press catches (4) together and unclip brake light switch
holder (3) from brake pedal.
Installation:
Depress brake pedal.
Slide brake light switch (2) as far as it will go into brake light
switch holder (3).
Grip brake light switch holder (3), slowly return brake pedal to
starting position and pull back to stop.
RA Replacing brake-light switch
BMW AG - TIS
07.02.2013 02:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
