bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Left Or Right Windshield Wiper Arm > < 2 RA Checking_adjusting Approach Angle Of Windshield Wiper Arms On Front Windscreen|Page 2561
Page 1
background image

61 61 041

Replacing both windscreen wiper blades

Move wipers into fold-back position:

Switch on terminal "R".

Actuate wiper control lever and bring wiper arms to a stop in

vertical position (fold-back position) by switching off terminal
"R".

Remove ignition key from ignition switch

 Fold back wiper arm (2).

Press retaining spring (1) and detach wiper blade (3) in direction
of arrow.

Installation:

Install new wiper blade and snap into place.

Fold wiper arms to windscreen.

Important!

Before switching on terminal "R" or the ignition or starting the
engine, you must fold the wiper arms onto the windscreen
otherwise damage will be caused.

Switch on terminal "R".

Set wiper system to rest position by flick-wiping.

RA  Replacing both windscreen wiper blades

BMW AG - TIS

07.02.2013  02:44

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Left Or Right Windshield Wiper Arm > < 2 RA Checking_adjusting Approach Angle Of Windshield Wiper Arms On Front Windscreen|Page 2561