X Series E53 X5 3.0i (M54) OFFRD
Up to 10/2003:
Note:
For purposes of clarity, illustration shows component
removed.
Release screws (1) and remove protective cap (2).
Installation:
If necessary, replace seal of protective cap (2).
Disconnect plug connection (1).
Loosen screws (2).
Feed out headlight vertical aim adjuster (3) in direction of arrow
and pull out.
Installation:
Pull out bulb holder of high-beam headlight.
Feed ball head (1) of headlight vertical aim adjuster into
guide (2).
From 10/2003:
Release screws (1) and remove cover (2) in direction of arrow.
Installation:
Make sure seal of cover (2) is correctly seated.
RA Removing and installing/replacing left headlight vertical aim adjuster (xenon he
BMW AG - TIS
07.02.2013 03:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
