bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing Impact Sensor For Left Or Right Side Airbag (multiple Re > < 3 RA Replacing Airbag Control Unit
Page 1
background image

65 77 550

Removing and installing/replacing impact
sensor for left or right side airbag

Warning!

Note airbag safety instructions!

Incorrect handling can activate airbag and cause injury.

Turn ignition key to 0 position.

Remove left or right front seat.

Remove entrance cover strip.

Lift carpet floor (1) in area of front seat.

Disconnect plug connection (2) in direction of arrow.

Release screws (3) and remove impact sensor for side
airbag (4).

Installation:

Arrow on impact sensor for side airbag (4) must point to sill.

Observe tightening torque, 65 77 2AZ.

RA  Removing and installing/replacing impact sensor for left or right side airbag

BMW AG - TIS

07.02.2013  04:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing Impact Sensor For Left Or Right Side Airbag (multiple Re > < 3 RA Replacing Airbag Control Unit