bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Drive With Gear (rear) For Actuating Slide_tilt Sunroof (panoramic Gla|Page 2852 > < 2 RA Replacing Drive With Gear (front) For Actuating Slide_tilt Sunroof (panorama Gla
Page 1
background image

67 61 517

Replacing drive with gear (rear) for actuating
slide/tilt sunroof (panoramic glass sunroof) 

Necessary preliminary tasks:

Remove rear grab handles

Remove trim for rear left and right roof pillar (C-pillar)

Remove trim for rear left and right roof pillar (D-pillar)

Detach mucket in area of roofliner

Unclip covers (1) in direction of arrow and remove.

Release screws (2).

Important!

Do not under any circumstance kink roofliner (3).

Unclip roofliner (3) at retaining points (4) towards bottom and
lower.

Note:

Secure drive with gear for actuating slide/tilt sunroof (3) against
falling out.

Release screws (2), tightening torque  54 13 1AZ

.

Lower drive with gear for actuating slide/tilt sunroof (3).

Note:

Screws (2) are microencapsulated.

Unlock plug connection (1), disconnect and remove drive with
gear for actuating slide/tilt sunroof (3).

Installation:

Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) exactly in gear teeth (3).

RA  Replacing drive with gear (rear) for actuating slide/tilt sunroof (panoramic gla

BMW AG - TIS

07.02.2013  04:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Drive With Gear (rear) For Actuating Slide_tilt Sunroof (panoramic Gla|Page 2852 > < 2 RA Replacing Drive With Gear (front) For Actuating Slide_tilt Sunroof (panorama Gla