X Series E53 X5 3.0i (M54) OFFRD
Removal of seatbelt height adjuster only:
Release screws (1) simultaneously so that seatbelt height adjuster
(2) does not tilt.
Remove seatbelt height adjuster (2).
Installation:
Tightening torque 72 11 12AZ.
Release screw (1).
Slide inertia reel unit (2) upwards at an angle and release from
wheel arch wall.
Installation:
Tightening torque 72 11 14AZ.
Installation:
Ensure correct seating of coding on inertia reel unit (1) in
wheel arch wall (2).
Feed inertia reel unit (1) and strap downwards out of opening in
adapter plate.
RA Removing and installing/replacing rear left or right seat belt
BMW AG - TIS
07.02.2013 04:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
