X Series E53 X5 4.4i (M62) OFFRD
64 51 522
Removing and installing or replacing
expansion valve
Necessary preliminary tasks:
•
Draw off refrigerant from A/C system
•
Remove heater bulkhead
•
Remove trim for instrument panel, bottom left
•
Remove right glovebox
Release screws (1), tightening torque 64 53 2AZ
.
Detach lines (2).
Installation:
Replace sealing rings.
Unhook holder (1).
Unclip heating duct for right footwell (2) and remove in direction
of arrow.
Installation:
Ensure heating channel for right footwell (2) is correctly seated.
Release screw (1).
If necessary, disconnect plug connection at socket.
Unclip trim on center console (2) and remove.
RA Removing and installing or replacing expansion valve
BMW AG - TIS
08.02.2013 14:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -