X Series E53 X5 4.4i (N62) OFFRD
12 51 150
Removing and installing/replacing wiring
harness section for fuel injectors on left or
right (N62, N62TU)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove acoustic cover
•
Remove ignition coil cover
Note:
The procedure is identical for both sides.
Illustrations show and descriptions refer to the left side.
Unfasten screws.
Unlock plug (1) and remove.
Remove positioning motor for eccentric shaft.
Unlock plugs on fuel injectors and disconnect.
Remove wiring harness.
Check function of DME.
RA Removing and installing/replacing wiring harness section for fuel injectors on l
BMW AG - TIS
09.02.2013 11:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -