X Series E53 X5 4.6is (M62) OFFRD
Open coolant drain plug on right side of engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 11 5AZ.
Remove alternator drive belt,
refer to 11 28 010.
Remove power steering pump,
refer to 32 41 060.
Note:
Lines remain connected.
Evacuate A/C system.
Disconnect lines between A/C compressor and condenser.
Disconnect suction line from A/C compressor and tie to one side.
Note:
A/C compressor remains on engine.
Remove transmission,
refer to 24 00 021.
Remove heat shield from starter motor.
Release cable connections to starter motor.
Remove starter motor.
Detach oil lines to transmission on heat exchanger for
transmission and remove.
Remove heat exchanger for transmission from radiator.
Remove radiator,
refer to 17 11 000.
Disconnect water hoses on alternator and thermostat housing.
RA Removing and installing engine (M62)
BMW AG - TIS
10.02.2013 19:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -