X Series E53 X5 4.6is (M62) OFFRD
Put the cylinder head on. Install new cylinder head bolts. Do not
wash off bolt coating.
Note:
Use special tool 00 9 120 as a torsion angle bracket.
Tighten down cylinder head bolts in sequence 1 to 10.
Tightening torque,
refer to Technical Data 11 12 8AZ.
Insert and tighten down guide rail screw.
Caution!
Do not damage the cylinder head.
Rotate camshafts until camshaft markings face upwards.
RA Removing and installing left cylinder head (M62)
BMW AG - TIS
10.02.2013 19:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -