X Series E53 X5 4.6is (M62) OFFRD
Tighten the screws (1 and 2).
Unfasten top left and right nuts on engine mount.
Raise engine with special tool 00 0 200 approx. 10 to 12 mm.
Remove front splash guard.
Remove reinforcement plate.
Caution!
The work step "Removing and installing reinforcement plate"
contains important installation instructions,
refer to 31 10 010.
Detach positive lead from starter motor and unclip from cable
guides.
RA Removing and installing/replacing upper section of oil sump (M62)
BMW AG - TIS
10.02.2013 19:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
