X Series E53 X5 4.6is (M62) OFFRD
Remove cable guide (1) for positive lead.
Unfasten screws to sealing cover.
Unfasten remaining screws from oil sump.
Remove upper oil sump section towards rear.
Installation:
Sealing faces clean and free of seal debris.
Coat engine block at gap to end cover and to timing case
cover with Drei Bond 1209 sealing compound (refer
to BMW Parts Service).
RA Removing and installing/replacing upper section of oil sump (M62)
BMW AG - TIS
10.02.2013 19:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
