X Series E53 X5 4.6is (M62) OFFRD
Screw down special tool 11 2 450 with hub for vibration
damper.
Note:
Protect engine bracket from damage.
Insert wood between engine support and special
tool 11 2 450.
Release central bolt (1).
Remove hub for vibration damper.
Installation:
Align groove in hub for vibration damper to featherkey.
Install hub (1) for vibration damper.
Note:
Lines on oil-water heat exchanger and water hoses remain
connected.
Release screw (1) and expansion rivet (2), remove mounting
plate with oil-water heat exchanger from radiator.
Installation:
Replace central screw.
Crank engine at central bolt and align dowel pin (1) to bore in
special tool 11 2 450.
RA Removing and installing/replacing hub for vibration damper (M62)
BMW AG - TIS
10.02.2013 19:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -