X Series E53 X5 4.6is (M62) OFFRD
Note:
Only screw (1) with sealing ring.
Replace sealing ring on screw (1).
Install and tighten down screws.
Feed timing chain onto camshaft adjustment unit distributor.
Insert solenoid valve and tighten down with special
tool 11 6 420.
Tightening Torque,
refer to Technical Data 11 36 12AZ.
Install right camshaft adjustment unit,
refer to 11 36 615.
Assemble engine.
RA Removing and installing/replacing distributor on right camshaft adjustment unit
BMW AG - TIS
10.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -