X Series E53 X5 4.6is (M62) OFFRD
Caution!
Do not shear sealing ring on edge of housing.
Remove sealing ring and apply light coat of oil.
Insert unrefined oil line in engine block.
Replace sealing ring (1) and apply a light coat of oil.
Insert governing line (filtered oil) in engine block.
Note:
Preassemble sealing ring (1) on governing line.
Position governing line so that it is secured in oil pump after
installation.
Replace sealing ring in oil pump.
Screw cap screw back into oil pump until stop.
RA Removing and installing/replacing oil pump (M62)
BMW AG - TIS
10.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -